Firing Supplies | Ceramic Kiln & Firing Supplies

Explore Firing Supplies at GlazeQueen for pottery studios, classrooms and ceramic firing setups. Compare product specifications, firing range, dimensions and compatibility before selecting supplies for your kiln. Manufacturer instructions should be followed for installation, placement, firing and safe operation.

CATEGORIES

Products 13-24 of 66

Show

Round Post 3" Wide 2" Hole
RND-POST

Availability: In Stock

Laguna Item #: RND-POST -

Self Supporting
SSB

Availability: In Stock

Orton Item #: SSB -

Skutt 1027 Elements 240V, Single Phase
SK-1027-EL-ST

Availability: In Stock

Skutt Item #: SK-1027-EL-ST -

Skutt 1227 Elements 240V, Single Phase SK-1227-EL-ST
1227-EL-ST

Availability: In Stock

Skutt Item #: 1227-EL-ST -

Skutt 818 Elements 240V, Single Phase
SK-818-EL

Availability: In Stock

Skutt Item #: SK-818-EL -

Skutt Peep Plugs
SKT-6587

Availability: In Stock

Skutt Item #: SKT-6587 -

Skutt Thermocouple
SKT-1515

Availability: In Stock

Skutt Item #: SKT-1515 -

Small
SRB

Availability: In Stock

Orton Item #: SRB -

Smoothset Mortar - Dry
RF513

Availability: In Stock

Laguna Item #: RF513 -

Use with firebrick and insulating firebrick. Air setting. Maximum service temperature 2900°F. Maximum service temperature, degrees F: 2900 Type of brick: IFB Lb required brushing coat 100 sq. ft. 20 Recommended water % for trowel 29 Recommended water % for dipping 50 Example: 50 lbs of dry mortar for troweling x 29% water = 14.5 lbs of water Recommended Manufacturers Mixing Instructions: Mix the water and dry mortar for 5 minutes, using a paddle mixer with at least 45 RPM. Place in an airtight...

Thermocouple Protection Tube
FS-110-12

Availability: In Stock

Laguna Item #: FS-110-12 -

Triangle Posts
TRI-PST

Availability: In Stock

Laguna Item #: TRI-PST -

Cone Holder
Plaque3

Availability: In Stock

Orton Item #: Plaque3 -

When choosing firing supplies, pay close attention to kiln compatibility, firing temperature, dimensions and operating requirements. Proper setup and firing practices help protect both your work and your equipment. Use the manufacturer's technical documentation for the specific product and kiln model before installation or use.